Five different lift functions for maximum productivity and safety.
FULL CONTROL OF YOUR MOWING DECKS WITH ONE SIMPLE SYSTEM.
Trimax’s Multi-Lift System (MLS) provides operators with five different lift functions for ultimate control of the mower.
MLS increases your mower’s functionality by giving the operator the flexibility to manouever in a wide range of environments.
Independent Lift raises either side deck independently. Ideal for mowing in tight areas or past obstacles.
QuikLIFT raises all mowing decks slightly off the ground. Ideal for traversing paths, driveways, and kerbsor turning while striping. Learn more about QuikLIFT here
BiLIFT raises the side decks for rear deck mowing only. Ideal for gates, driveways, and narrow spaces.
Transport Mode completely raises all three decks. Ideal for road transport.
Each lift function complies with international CE and ISO safety standards for operation in public places.
Trimax MLS also comes with Remote Unlock, enabling control of the mowing decks from the tractor seat, and Drive Protect, which guards against unsafe lift conditions.
Unlock the mower wings’ transport lock from within the tractor cab using the tractor’s hydraulic remote.
REAR ROLLER
Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.
STRIPING CAPABLE
Able to be paired with tractors as low as 25 hp, perfect for smaller budgets and compact tractors.
STRIPING CAPABLE
Full width front and rear rollers produce beautiful striping.
LOW HP REQUIREMENTS
The open deck design for grass processing, efficient belt drive system and a short mower front-to-rear allows for use on lower HP tractors.
ANTI-WEAR SKIDS
Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.
AUTOMATIC BELT TENSIONERS
Eliminates the need for belt adjustments and improves drive to the rotor.
PRUNING GUIDE
Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.
DISCHARGE CONTROL
Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.
REPLACEABLE INTERNAL LINER
A 6mm (1/4″) replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.
REPLACEABLE SKIDS
Wear skids on trailing arms prolong mower life in demanding terrain. The skids can easily be removed or replaced for maximum versatility between mulching and mowing.
SAFETY COMPLIANT
Meets international safety standards for thrown object protection and hand and foot ingress in every configuration.
MAINTENANCE-FREE ROLLER BEARINGS
New highly-rated sealed roller bearings require no regular greasing.
LOW MAINTENANCE
Easily accessible grease locations and maintenance-free features make regular service quicker and easier than ever. Unique rotor bearing and roller bearings can be replaced quickly and easily.
ROBUST ROLLER
Replaceable robust roller with 5mm-thick walls for demanding applications. Roller height is easily adjusted.
SMOOTH PROFILE
New internal rotor bearings create a smooth external profile to avoid catching on debris or vines and decrease the distance between the edge of the mower and the edge of the cut.
MOW AND MULCH WITH ONE MACHINE
Mow grass to a fine finish and mulch prunings up to 90 mm in diameter with one machine – or even in a single pass. Simply adjust the rear flap position and cut height to switch between fine turf mowing and heavy mulching.
MULTI-LIFT SYSTEM
ANTI-SCALP ROLLER
A raised front roller provides anti-scalp protection for your turf while improving long grass ingress and allowing for an easier hookup to your tractor.
LONG GRASS PERFORMANCE
New side channel and front roller designs improve long grass ingress, and lowered front flaps stand long grass up for a clean cut.
LOW MAINTENANCE
All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.
TURF TYRE
Trimax turf tyres help distribute the weight of the mower for less ground disturbance.
ULTIMATE CONTOUR-FOLLOWING
Contour-following is compromised when decks are over 10′ wide. The X-WAM features multiple smaller decks for superior cut quality.
FULL HYDRAULIC OPERATION
The X-WAM uses full hydraulic operation for deck retraction into road transport mode.
WEAR RESISTANT SKIDS
Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.
FRONT CASTOR WHEELS
Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.
SAFE CLIPPING DISPERSION
Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.
SNAKE MULCH KIT
Save on purchasing dedicated leaf blowing and collection units with the Snake Mulch Kit. Retrofittable to existing Snake S1 & S2 models.
WHEELS RUN ON CUT GRASS
The rear deck is located between the transport wheels so grass is not flattened prior to mowing.
ROAD TRANSPORTABLE
Equipped with a roadworthy chassis and capable of being towed at highway speeds.
SUSPENSION
The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.
LOW MAINTENANCE
SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.
RAPIDSET HEIGHT ADJUSTMENT
Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.
HIGH SPINDLE SPEEDS
The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.
LOCTEK ROLLER BEARING RETENTION SYSTEM
A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.
REPLACEABLE SKIDS
Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.
ANTI BLOCK SYSTEM
Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.
IMPROVES FEED QUALITY
Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.
ADVANCED DESIGN
Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.
LOW MAINTENANCE
With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.
SAFE IN PUBLIC SPACES
Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.
ADVANCED DESIGN
Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.
REDUCED MAINTENANCE
We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!
EASY TO CLEAN
The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.
ACCURATE SPINDLE SETTING TECHNOLOGY
Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.
LOW MAINTENANCE
To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.
3 YEAR WARRANTY
We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.
SAFE CLIPPING DISPERSION
Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.
STEADFAST SPINDLES
Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.
DISCHARGE CONTROL
Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.
HYDRAULIC SIDE SHIFT
The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.
PRUNING GUIDE
Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.
INTERNAL LINER
A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.
MOST VERSATILE STEALTH
The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.
QUIKLIFT PARTIAL DECK LIFT
Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, footpaths and pavements.
AUTOMATIC BELT TENSIONERS
Eliminate the need for belt adjustments and improve drive to the spindles and blades.
ZERO TURN
Allows continuous cutting while turning sharply for maximum productivity.
ARTICULATION ABILITY
With three articulating decks the Snake has the ability to follow contours with minimal scalping.
EASY HEIGHT ADJUSTMENT
Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.
FULL WIDTH ROLLERS
A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.
STAND ON COVERS
Provides safe and easy access to the rear of the tractor when coupling the mower.
BELT CAVITY DUAL WASH FLAPS
Provides easy access for removal of grass and drainage of water from belt cavity.
FULL WIDTH ROLLERS
Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.
RAPIDSET HEIGHT ADJUSTMENT
Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.
LAZERBLADEZ
With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.
REAR ROLLER
Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.
NEW IMPROVED ROTOR
Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.
UNIQUE CONVERTER
When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.
LOCTEK ROLLER BEARING RETENTION SYSTEM
A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.