Select Page

Latest news from Trimax.

Learn about the latest product updates and Trimax releases here on our blog page, or follow us on our social media via the links below, to stay in the know.

Commercial mower manufacturer, Trimax Mowing Systems, have this month introduced QuikLift – a unique electronic system to lift mower decks off the ground without the need to disengage the tractor PTO.

QuikLift’s features help increase efficiency and reduce maintenance. QuikLift helps eliminate turf damage by removing lateral movement of the mower rollers on the turf when making tight turns which increases yield or the turf usage area. Because of the reduction in lateral movement of the roller, bearing life is greatly increased as force on the bearing is eliminated. There are benefits for the tractor also. Because the PTO can still be engaged with the decks in the QuikLift position the operator doesn’t need to switch the PTO off and on. This greatly reduces PTO stress and reduces maintenance for the tractor itself.

The Trimax QuikLift is unique because the system utilises electrical proximity sensors to restrict the hydraulic rams from lifting. This is favourable compared to mechanical steel on steel systems which transfer high forces into the steel frame causing fatigue over time and mechanical wear points.

Quiklift is operated by a control box placed inside the cab of the tractor. Since it’s not fixed, drivers can place the control wherever they see fit for rapid operation. Decks can be lifted and dropped at the touch of a button and it’s able to be operated from the most convenient place for the driver.

For added safety the control monitors power to the QuikLift system, guarding against any possible PTO damage that may occur from unexpected power failure to the sensors. A LED Light system indicates when QuikLift is safe to operate.

Operators can fully customise QuikLift’s deck lift heights, giving them both the best user experience and operational effectiveness. With a simple adjustment between the pre-set holes located near the proximity sensors, operators can lift the deck anywhere between just off the ground and 3 feet high. This adjustment, dictated by the nature and evenness of the terrain, can speed up turns and further increase productivity.

“QuikLift is going to help our customers mow much more efficiently and is covered by our three-year warranty. And our warranty is the longest on the market, more than double what others are offering, because we stand behind our products.” ~ Bob Sievwright – Founder and CEO of Trimax Mowing Systems.

For more information on the electronic QuikLift System, or for a free demonstration please contact Trimax at 07 541 0411 or visit www.trimaxmowers.co.nz

AUTOMATIC BELT TENSIONERS

Eliminates the need for belt adjustments and improves drive to the rotor.

Belt-Tensioner

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

Pruning-Guide

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

REPLACEABLE INTERNAL LINER

A 6mm (1/4″) replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

Force-Liner

REPLACEABLE SKIDS

Wear skids on trailing arms prolong mower life in demanding terrain. The skids can easily be removed or replaced for maximum versatility between mulching and mowing.

 

SAFETY COMPLIANT

Meets international safety standards for thrown object protection and hand and foot ingress in every configuration.

 

MAINTENANCE-FREE ROLLER BEARINGS

New highly-rated sealed roller bearings require no regular greasing.

 

LOW MAINTENANCE

Easily accessible grease locations and maintenance-free features make regular service quicker and easier than ever. Unique rotor bearing and roller bearings can be replaced quickly and easily.

 

HEAVY DUTY ROLLER

Replaceable heavy-duty roller with 5mm-thick walls for demanding applications. Roller height is easily adjusted.

 

SMOOTH PROFILE

New internal rotor bearings create a smooth external profile to avoid catching on debris or vines and decrease the distance between the edge of the mower and the edge of the cut.

 

SIMULTANEOUS MOW AND MULCH

Mow grass and mulch prunings (up to 90 mm in diameter) in a single pass.

 

MULTI-LIFT SYSTEM

ANTI-SCALP ROLLER

A raised front roller provides anti-scalp protection for your turf while improving long grass ingress and allowing for an easier hookup to your tractor.

 

LONG GRASS PERFORMANCE

New side channel and front roller designs improve long grass ingress, and lowered front flaps stand long grass up for a clean cut.

 

LOW MAINTENANCE

All moving surfaces have long life synthetic bushes, or greasable bearings and remote grease points for hassle-free maintenance.

 

TURF TYRE

Trimax turf tyres help distribute the weight of the mower for less ground disturbance.

 

ULTIMATE CONTOUR-FOLLOWING

Contour-following is compromised when decks are over 10′ wide. The X-WAM features multiple smaller decks for superior cut quality.

 

FULL HYDRAULIC OPERATION

The X-WAM uses full hydraulic operation for deck retraction into road transport mode.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

FRONT CASTOR WHEELS

Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

SNAKE MULCH KIT

Save on purchasing dedicated leaf blowing and collection units with the Snake Mulch Kit. Retrofittable to existing Snake S1 & S2 models.

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

 

ROAD TRANSPORTABLE

Equipped with a roadworthy chassis and capable of being towed at highway speeds.

 

SUSPENSION

The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.


 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFE IN PUBLIC SPACES

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUICKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, footpaths and pavements.

 

AUTOMATIC BELT TENSIONERS

Eliminate the need for belt adjustments and improve drive to the spindles and blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry