Striker™
Procut S4™
Procut FM™
Topper™
Stealth S3™
Snake S2™
Pegasus S4™
Ezeemow FX™
Flaildek FX™
Warlord S3™THANKS
FOR BOOKING
A FREE DEMO.
We’ve received your contact details and our Trimax technicians will be in touch soon.
In the meantime, return to the Trimax homepage by selecting the link below:
We’ve received your contact details and our Trimax technicians will be in touch soon.
In the meantime, return to the Trimax homepage by selecting the link below:
SteadFast Sealed Spindles have eliminated the tedius task of regular greasing. Snake now also features maintenance free pivot bushes.
Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.
The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.
A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.
Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.
Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.
Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.
Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.
With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.
Striker exceceds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.
Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.
We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!
The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.
Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.
To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.
We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.
Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.
Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.
Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.
The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.
Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.
A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.
The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.
Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, paths and curbs.
Eliminate the need for belt adjustments and improve drive to the spindles blades.
Allows continuous cutting while turning sharply for maximum productivity.
With three articulating decks the Snake has the ability to follow contours with minimal scalping.
Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.
A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection. A pair of castor wheels support the front of the mower.
Provides safe and easy access tot he rear of the tractor when coupling the mower.
Provides easy access for removal of grass and drainage of water from belt cavity.
Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.
Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.
With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.
Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.
Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.
When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.
A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.
With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.