Select Page

ProCut⁄⁄ S4 Options.

Engineered to withstand everyday use in the toughest commercial environments the ProCut Series 4 is reined excellence – and easier to operate and maintain than ever before!

High Performance Roller Mower.

The Trimax ProCut has been a successful part of the Trimax range for nearly 30 years. The perfect small utility mower for sod farms and sportsfields the ProCut is used on high profile turf around the world.

Engineered to be easier to operate and maintain that ever before the ProCut Series 4 retains the same exceptional cut quality that set the original apart from the competition. With more spindles and shorter blade beams than comparable rotary mowers the ProCut provides more cuts per forward metre of travel, a finer clip and is  fitted with Trimax LazerBladez™  – a carefully engineered blade system which produces a superior cut and finish at high ground speeds.

ProCut Series 4 includes patented Trimax features including SteadFast™ maintenance free spindles, the RapidSet™ easy height adjustment system and the new LocTEK stubless roller retention system for vastly increased roller retention and alignment.

The ProCut is available in painted or galvanized finish and comes with a 3 year warranty – the longest warranty on the market!

Talk to us today about the capabilities of the ProCut S4 in your environment.

ProCut⁄⁄ S4 Features.

The below features come as standard on all ProCut S4 mowers:

LOCTEK

A stubless roller bearing system for vastly improved roller retention, alignment, bearing life and minimal maintenance.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow the easy adjustment of cut heights.

STEADFAST SEALED SPINDLES

We’ve eliminated the tedious task of regular greasing. Covered by our 3-year warranty, maintenance costs are reduced, and productivity is enhanced.

STAND ON COVERS

Enables safe and easy access to the rear of the tractor when coupling the mower. Quick release latches allow easy removal for cleaning and servicing.

LOCTEK

A stubless roller bearing system for vastly improved roller retention, alignment, bearing life and minimal maintenance.

LAZERBLADEZ™

Available in up-lift and flat formation to suit mowing requirements, the unique tilt forward design minimises hang back in tough conditions.

POWER SAVING FLAILS

Strong forged steel flail with an aerodynamic profile reduces hp requirements yet generates sufficient draught to lift grass for a clean cut.

ProCut⁄⁄ S4 Options.

Features Icons_Quattro

QUATTRO BLADE SYSTEM

This system adds 2 more blades to each spindle (2 flat & 2 upturned) for a finer cut on warm season grasses. (Currently unavailable on the ProCut 210 model).

Features Icons_Single Orchard

PROCUT S4 ORCHARD

ProCut S4 comes with a single rear roller only, allowing greater intake of grass and improved cutting ability in demanding long grass applications.

Features Icons_Front Mount

FRONT MOUNT

Available in front mount three-point linkage configuration with front castors and single rear roller. Please see the ProCut FM Product Page for more information.

Features Icons_Anti Bounce Skids

ANTI-BOUNCE SKIDS

Ideal for high speed mowing, the Anti-Bounce Skids reduce the ‘scalping’ effect when mowing on turf which is not smooth. Helps to ease the mower over humps between the front and rear rollers.

Features Icons_Galvanized

GALVANIZED

Hot-Dip Galvanizing provides added protection against corrosion in coastal environments with high salt concentrations and applications with high fertiliser usage.

Features Icons_Roller Scrapers

ROLLER SCRAPERS

Trimax Helical Scrapers operate with reduced tension but apply a constant pressure across the roller to assist with the cleaning of debris

FEATURES

Procut 2019

 

 

SPECIFICATIONS.

Cutting Width1740 mm (68.5″)No. of Blade Spindles3
Overall Width1884 mm (74″)Approx Weight511 kg
Height1085 mm (43”)Minimum Tractor Size30 hp
Cut Height Range10-100 mm (⅜”  – 4”)Warranty (Years)3
Cutting Width2060 mm (81″)No. of Blade Spindles3
Overall Width2200 mm (87″)Approx Weight608 kg
Height1085 mm (43”)Minimum Tractor Size40 hp
Cut Height Range10-100 mm (⅜”  – 4”)Warranty (Years)3
Cutting Width2316 mm (91″)No. of Blade Spindles4
Overall Width2460 mm (97″)Approx Weight641 kg
Height1085 mm (43”)Minimum Tractor Size40 hp
Cut Height Range10-100 mm (⅜”  – 4”)Warranty (Years)3
Cutting Width2890 mm (114″)No. of Blade Spindles5
Overall Width3130 mm (123″)Approx Weight770  kg
Height1085 mm (43”)Minimum Tractor Size45 hp
Cut Height Range10-100 mm (⅜”  – 4”)Warranty (Years)3

Download our
catalogue.

Nestrum seque core valoris natio. Itatiis volut aut arum ut etur maxim nonseaue oedi sectecuotur acesci oicabor as moluntatem..,

Book a
Demo.

Nestrum seque core valoris natio. Itatiis volut aut arum ut etur maxim nonseaue oedi sectecuotur acesci oicabor as moluntatem..,

Buy genuine
Trimax Parts.

Nestrum seque core valoris natio. Itatiis volut aut arum ut etur maxim nonseaue oedi sectecuotur acesci oicabor as moluntatem..,

HEAVY DUTY ROLLER

A robust roller with 8.5mm-thick walls to handle tough applications.

 

REAR ROLLER

The Topper is fitted with a rear roller, which ensures that in undulating
environments you’ll have increased protection from scalping.

 

LOW HP REQUIREMENTS

The open deck design for grass processing, efficient belt drive system and a short mower front-to-rear allows for use on lower HP tractors.

 

ADVANCED ENGINEERING

Trimax’s meticulous design process combined with bespoke, innovative manufacturing technologies produce the most accurate rotary cut in the market.

 

COMPACT TRACTOR SUITABLE

Able to be paired with tractors as low as 25 hp, perfect for smaller budgets and compact tractors.

 

STRIPING CAPABLE

Full width front and rear rollers produce beautiful striping.

 

ANTI-WEAR SKIDS

Anti-wear skids reduce wear on side channels when operating in rough or uneven terrain.

 

WEAR RESISTANT SKIDS

Trailing skids made from abrasion-resistant steel extends bearing life and enables productivity in challenging environments.

 

FRONT CASTOR WHEELS

Front semi-pneumatic castor wheels allow the FlailDek FX to follow ground contours independently from the tractor.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. The FlailDek FX expels debris in a downward direction behind the mower.

 

SNAKE MULCH KIT

Save on purchasing dedicated leaf blowing and collection units with the Snake Mulch Kit. Retrofittable to existing Snake S1 & S2 models.

WHEELS RUN ON CUT GRASS

The rear deck is located between the transport wheels so grass is not flattened prior to mowing.

 

ROAD TRANSPORTABLE

Equipped with a roadworthy chassis and capable of being towed at highway speeds.

 

SUSPENSION

The Pegasus is fitted with a Duratorque Suspension System capable of highway speeds.


 

LOW MAINTENANCE

SteadFast Sealed Spindles have eliminated the tedious task of regular greasing. Snake now also features maintenance free pivot bushes.

 

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights. You can adjust heights without having to raise and lower the wings.

HIGH SPINDLE SPEEDS

The Trimax Topper has more spindles than comparison shaft driven toppers. These also spin at higher spindle speeds with shorter blade beams. This results in significantly more cuts per forward meter of travel and a much finer clip.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A patent pending stubless roller bearing system for vastly improved retention, bearing life and replacement ease.

 

REPLACEABLE SKIDS

Skids on Warlord trailing arms prolong mower life in demanding terrain. The skids can be moved and replaced when required.

 

ANTI BLOCK SYSTEM

Topper spindles are fitted with a unique anti-block mechanism which deters long grass from catching and binding around the spindle restricting movement.

 

IMPROVES FEED QUALITY

Topping can be used to control poor quality pasture components such as removal of seed-heads and thistles and prevent their reoccurance.

 

ADVANCED DESIGN

Topper is short front to rear and mounts close to the tractor; allowing the use of smaller tractors. The high underbody clearance and open deck design allows for good flow of grass into the mowing deck and a clean ejection of cut grass.

 

LOW MAINTENANCE

With only 4 carefully positioned grease points and robust spindles with sealed ball bearings, the Trimax Striker has incredibly low maintenance requirements.

 

SAFE IN PUBLIC SPACES

Striker exceeds international safety standards and is backed up by our meticulous testing and support network. Striker is a mower that can be used with confidence even when mowing in confined areas.

 

ADVANCED DESIGN

Striker incorporates decades of experience with multi-spindled rotary roller mowers. Lighter than other Trimax mowers, it retains the attention to detail that minimises downtime and makes servicing easy. The cutting system, body integrity and sealed ball bearing spindles have been proven with extensive and rigorous testing.

 

REDUCED MAINTENANCE

We’ve eliminated the need to grease the pivot points and our updated spindle technology requires less maintenance and offers greater simplicity. You can spend more time mowing and less time maintaining!

 

EASY TO CLEAN

The improved belt chamber design includes front openings, allowing grass to be easily washed or blown out.

 

ACCURATE SPINDLE SETTING TECHNOLOGY

Trimax’s unique and protected spindle technology ensures spindle height is perfectly aligned across the length of each deck, providing the most accurate and consistent cut in the market.

 

LOW MAINTENANCE

To ensure optimum efficiency we’ve reduced the number of grease points by 15%, giving you 35% less maintenance costs than the Trimax Pegasus S3.

 

3 YEAR WARRANTY

We build mowers that last and they’re supported with a 3 year industry leading warranty. Our robust design, coupled with our experienced service and support network, ensures minimum downtime and maximum productivity.

 

SAFE CLIPPING DISPERSION

Safety is paramount when mowing in public areas. This is why Trimax has designed the Ezeemow FX to expel debris in a downward direction behind the mower.

 

STEADFAST SPINDLES

Somewhat of an operators dream, these spindles offer extremely low maintenance and remove the regular task of regular greasing. As such, costs are reduced and productivity is enhanced.

 

DISCHARGE CONTROL

Coarseness of mulch is controlled by the height of the rear flap. The finest mulch is produced with the flap in the lowest position, this low dispersion also improves safety in public spaces. Lifting the flap fully open whilst servicing provides uninhibited access to flails and rotor.

HYDRAULIC SIDE SHIFT

The Warlord S3 can be positioned directly behind the tractor or quickly offset by up to 19″. This feature assists with transport and manoeuvring around obstacles.

PRUNING GUIDE

Helps direct prunings and other foliage into the front aperture of the mower, which would otherwise be too high or wide. It also helps keep debris away from the hydraulic system for protection in challenging environments.

INTERNAL LINER

A 1/4″ replaceable internal liner reduces noise and minimizes outer body damage prolonging mower life.

MOST VERSATILE STEALTH

The improved cutting chamber and baffle design directs airflow from the blades out and over the rear roller. This improves cut quality and spread in both long and short grass.

 

QUIKLIFT TEMPORARY DECK LIFT

Enables all three mower decks to be raised without disengaging the PTO to traverse driveways, footpaths and pavements.

 

AUTOMATIC BELT TENSIONERS

Eliminate the need for belt adjustments and improve drive to the spindles and blades.

ZERO TURN

Allows continuous cutting while turning sharply for maximum productivity.

 

ARTICULATION ABILITY

With three articulating decks the Snake has the ability to follow contours with minimal scalping.

EASY HEIGHT ADJUSTMENT

Clearly displayed stainless steel height indicators allow for the easy adjustment of cut heights without having to raise or lower the wings.

FULL WIDTH ROLLERS

A large diameter rear roller on the ProCut follows the contours and supports the mower across its entire width, providing excellent anti-scalp protection.

STAND ON COVERS

Provides safe and easy access to the rear of the tractor when coupling the mower.

 

BELT CAVITY DUAL WASH FLAPS

Provides easy access for removal of grass and drainage of water from belt cavity.

FULL WIDTH ROLLERS

Full width rollers on all decks follow the contours of the ground and provide excellent anti-scalp protection. Rollers also allow mowing along the edge of banks or paths, and produces a superb striping effect for those wishing to pattern their turf. Safety is enhanced as rollers contain debris in the cutting chamber.

RAPIDSET HEIGHT ADJUSTMENT

Clearly displayed cut height indicators allow for simple and easy alteration or resetting of cut heights.

LAZERBLADEZ

With their unique ’tilt forward’ design, carefully engineered centre of gravity and optimised blade thickness, LazerBladez achieve a superior cut and finish. They’re also cost efficient compared to reels or solid blade beams as only the fling-tip requires replacement.

 

REAR ROLLER

Full width rear roller prevents scalping, permits the edge of the mower to be run along kerbs, adds to overall safety and produces striping.

 

NEW IMPROVED ROTOR

Designed to withstand the toughest environments our new rotor is more durable ensuring downtime is kept to an absolute minimum.

 

UNIQUE CONVERTER

When in a downward position the converter creates suction, which lifts grass for a superb cut. For work in heavy grass, lift converter for increased grass intake.

 

LOCTEK ROLLER BEARING RETENTION SYSTEM

A stubless roller bearing system for vastly improved roller retention, roller alignment, increased bearing life and minimal maintenance. Includes our new increased strength tri-bolt bearing housing.

 

Trimax Snake Demo Video UK from Trimax Mowing Systems on Vimeo.

POWER SAVING FLAILS

With their aerodynamic profile our strong forged steel flails reduce hp requirements, yet generate sufficient updraught for a clean cut.

 

Subscribe to our mailing list

* indicates required

Select your Industry